Protoshield com Relés para Arduino MKR
Este Protoshield com Relés permite adicionar facilmente relés ao seu projeto baseado na placa Arduino MKR.
(SEM IVA 47.97€)
local_shippingPORTES DE ENVIO GRÁTIS
O Feather M0 RFM96 LoRa Radio 433MHz da Adafruit é uma placa de desenvolvimento com um módulo rádio 433MHz integrado.
Descrição em Português Brevemente Disponível.
This is the Adafruit Feather M0 RFM96 LoRa Radio (433 MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 433MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the high power requirements of WiFi.
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.
This is the 433 MHz radio version.
At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip.
To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.
Here's some handy specs! Like all Feather M0's you get:
This Feather M0 LoRa Radio uses the extra space left over to add an RFM9x LoRa 868/915 MHz radio module. These radios are not good for transmitting audio or video, but they do work quite well for small data packet transmission when you need more range than 2.4 GHz (BT, BLE, WiFi, ZigBee).
Our initial tests with default library settings: over 1.2mi/2Km line-of-sight with wire quarter-wave antennas.
Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also toss in some headers so you can solder it in and plug into a solderless breadboard. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Lipoly battery and USB cable not included but we do have lots of options in the shop if you'd like!
EagleCAD, Fritzing and datasheet available in the product tutorial
Product Dimensions: 50.8mm x 23.0mm x 7.2mm / 2.0" x 0.9" x 0.3"
Product Weight: 5.6g / 0.2oz
Este Protoshield com Relés permite adicionar facilmente relés ao seu projeto baseado na placa Arduino MKR.
Este Shield Multifunções, compatível com Arduino UNO, Mega e Leonardo, possui diversas características que o tornam ideal para iniciantes que queiram aprender e experimentar.
O Vma449 integra o Gravador de Voz ISD1820 e CI de reprodução para gravar uma única mensagem com até 20 segundos de duração. A mensagem gravada é armazenada na memória flash analógica que mantém a mensagem armazenada mesmo havendo uma falha de energia. O módulo possui um microfone integrado para gravar a sua mensagem e botões para gravação, reprodução parcial ou reprodução total das funções da mensagem.
Programador de PICS ISCP K150.